High-performance centrifugal separators remove large amounts of liquid by inertia, with very low pressure loss and up to 99% separation. They protect downstream coalescing filters and are fitted after coolers or on buffer tanks.
Built to use very little energy: at part load, the 4.3″ touchscreen control stops the refrigerant compressor and the air is cooled by the cold stored in the heat exchanger. Frequency-controlled fan, low pressure loss and low-GWP refrigerant.
Heatless regeneration for extremely dry air, below the usual pressure dew point. Essential in food, beverages and moisture-sensitive processes.
Heat-regenerated, with no purge of already dried process air. Result: up to 25% less energy than a cold-regenerated system.
Removes solid and liquid particles down to 1 µm with 99.925% separation, for compressed air and nitrogen. Low, near-constant differential pressure over 12 months. The housing lock prevents assembly errors.
The receiver stores air, buffers demand swings, separates part of the condensate and reduces compressor starts.
Our engineers will answer and propose the right solution.